Comic 5/Polish

From BNSwiki
< Comic 5(Difference between revisions)
Jump to: navigation, search
m
 
(2 intermediate revisions by 2 users not shown)
Line 1: Line 1:
__NOTOC__
+
<h1>[http://www.iscaffold.com.cn scaffolding]</h1>
[[Image:5_4.png|frame|Coś tu śmierdzi...]]
+
'''Link:''' {{Comic|5}}
+
  
'''Ta strona po angielsku:''' [[Comic 5]]
+
Construction requirements of steel tubular scaffold
  
'''Tytuł:''' Steve ma randkę - część 1
+
Steel tubular scaffolding structure requires a
  
'''Data:''' 15 Września, 2004
+
Based on the requirements specification 《Architecture and construction of steel tubular scaffold safety specifications》
  
'''Problematyka:''' Beaver ma randkę ze zdechłą rybą
+
One. Common [http://www.iscaffold.com.cn scaffolding] design dimensions
  
'''Obsada:''' [[Beaver]], [[Steve]], [[Miranda]]
+
1.1 Subject to Article 4.3.2 of this specification, the commonly used open-type single, double scaffold design size, should be adopted by the following two tables.
  
'''Ilość; obrazków:''' 5
+
II. Longitudinal horizontal bar, horizontal bar horizontal, scaffolding boards
<br clear="all" />
+
==Transkrypcja==
+
  
======Obrazek 1======
+
2.1 The vertical structure of horizontal rods shall meet the following requirements:
  
Steve: "Hej Beaver, jak wyglÄ…dam?"<br />
+
1 horizontal bar should be set vertically inside the pole, its length should not be less than 3 cross;
Beaver: "Całkiem ostro Steve, cóż to za okazja?"
+
  
======Obrazek 2======
+
2 vertical take a long horizontal bar fastener docking connector should be adopted, may also overlap. Butt, take shall meet the following requirements:
  
Steve: "Mam randkÄ™!"<br />
+
1) longitudinal horizontal bar of the docking fasteners should be staggered: two adjacent vertical joints should not be set horizontal bar at the synchronous or within the same span; not synchronized or different across the two adjacent joints
Beaver: "To świetnie Steve! Kim jest szczęśliwa panna?"
+
  
======Obrazek 3======
+
Staggered horizontal distance of not less than 500mm; the joint center to the nearest distance from the primary node should not be greater than the vertical distance of 1 / 3, as follows:
  
Dzwonek do drzwi rozbrzmiewa dźwiękiem DINGA-DONG!<br />
+
2) lap length not less than 1m, should be such as fastener spacing is set to three fixed rotation, cover edge of the fastener to the end of longitudinal overlap of not less than the distance of legs side 100mm;
Steve: "To na pewno ona"
+
  
======Obrazek 4======
+
3) When using the stamped steel scaffold boards, wooden scaffolding boards, bamboo scaffold board Strings, the longitudinal lateral horizontal bar horizontal bar should be used as the bearing, with a right-angle fastener fixed to the rails; when using
  
Steve przychodzi z ubranÄ…, martwÄ… rybÄ….<br />
+
Bamboo fence scaffolding boards, vertical horizontal bar should be fixed at right angles to the horizontal level rod fasteners and should be equally spaced set, spacing should not exceed 400mm.  
Steve: "Beaver, chciałbym byś poznał moją narzeczoną, Mirande. Miranda, to jest Beaver"
+
  
======Obrazek 5======
+
More knowledge of [http://www.iscaffold.com.cn scaffolding] and [http://www.iscaffold.com.cn aluminum beam] description, tudltrgwt tudgtiwt please visit this site and the scaffolding bbs to the website: http://www.iscaffold.com.cn 24 hour customer service phone!
 
+
Beaver: "Steve, ona jest zdechłą ryba"<br />
+
Beaver: "A na mój nos, już od dłuższego czasu"<br />
+
Steve: "Nie słuchaj go Mirando, on jest zazdrosny o naszą miłość"
+
 
+
==Zabawne fakty==
+
Ilość prążków na ogonie Beavera zmienia się z każdym obrazkiem.
+
 
+
 
+
==PowiÄ…zania==
+
 
+
Brak.
+
 
+
{{PolishPageNav|prev=4|next=6}}
+
 
+
[[Category:Polish]]
+

Latest revision as of 01:06, 24 March 2011

scaffolding

Construction requirements of steel tubular scaffold

Steel tubular scaffolding structure requires a

Based on the requirements specification 《Architecture and construction of steel tubular scaffold safety specifications》

One. Common scaffolding design dimensions

1.1 Subject to Article 4.3.2 of this specification, the commonly used open-type single, double scaffold design size, should be adopted by the following two tables.

II. Longitudinal horizontal bar, horizontal bar horizontal, scaffolding boards

2.1 The vertical structure of horizontal rods shall meet the following requirements:

1 horizontal bar should be set vertically inside the pole, its length should not be less than 3 cross;

2 vertical take a long horizontal bar fastener docking connector should be adopted, may also overlap. Butt, take shall meet the following requirements:

1) longitudinal horizontal bar of the docking fasteners should be staggered: two adjacent vertical joints should not be set horizontal bar at the synchronous or within the same span; not synchronized or different across the two adjacent joints

Staggered horizontal distance of not less than 500mm; the joint center to the nearest distance from the primary node should not be greater than the vertical distance of 1 / 3, as follows:

2) lap length not less than 1m, should be such as fastener spacing is set to three fixed rotation, cover edge of the fastener to the end of longitudinal overlap of not less than the distance of legs side 100mm;

3) When using the stamped steel scaffold boards, wooden scaffolding boards, bamboo scaffold board Strings, the longitudinal lateral horizontal bar horizontal bar should be used as the bearing, with a right-angle fastener fixed to the rails; when using

Bamboo fence scaffolding boards, vertical horizontal bar should be fixed at right angles to the horizontal level rod fasteners and should be equally spaced set, spacing should not exceed 400mm.

More knowledge of scaffolding and aluminum beam description, tudltrgwt tudgtiwt please visit this site and the scaffolding bbs to the website: http://www.iscaffold.com.cn 24 hour customer service phone!

Personal tools
Namespaces
Variants
Actions
wiki navigation
site navigation
Toolbox